For other alternatives, please contact us for more information.

0 Alternative products available

E14R50P02

Dual Band Tower Mounted Amplifier, 700//900 MHz, 12 dB, 2 BTS & 2 ANT ports, AISG with 1 RET connector (1 device with 2 sub-units), with 4.3-10 connectors

Find a Partner

Specifications

Finish making your selections or clear them to view relevant specifications.

Download

Features and Benefits

Industry leading PIM performance
New 4.3-10 connectors for improved PIM performance and size reduction
2 input ports and 2 output ports
Designed to boost UP-Link Coverage and KPIs
Automatic LNA by-pass function
Connectors “in line”
TMA is operating in AISG mode
Single AISG with 1 RET connector
1 device with 2 sub-units
Built in lightning protection

Specifications

Product Classification

Product Type

1-BTS:1-ANT (Uniplex) | Tower mounted amplifier

General Specifications

Color	Gray
Modularity	2-Twin
Mounting Pipe Hardware	Band clamps (2)
RF Connector Interface	4.3-10 Female

Dimensions

Height	266 mm \| 10.472 in
Width	276 mm \| 10.866 in
Depth	113 mm \| 4.449 in
Mounting Pipe Diameter Range	42.6–122 mm

Outline Drawing

Click on image to enlarge.

Electrical Specifications

License Band, Band Pass	APT 700
License Band, LNA	APT 700 \| CEL 900 \| EDD 800

Electrical Specifications, dc Power/Alarm

dc Switching/Redundancy	Yes
Lightning Surge Current	10 kA
Lightning Surge Current Waveform	8/20 waveform

Electrical Specifications, AISG

AISG Connector	8-pin DIN Female
AISG Connector Standard	IEC 60130-9
Protocol	AISG 2.0
Voltage, AISG Mode	10–30 Vdc

Electrical Specifications

Sub-module	1 \| 2	1 \| 2
Branch	1	2
Port Designation	ANT 700	ANT 900
License Band	APT 700, Band Pass APT 700, LNA	CEL 900, LNA

Electrical Specifications, Rx Uplink

Frequency Range, MHz	703–733	880–915
Bandwidth, MHz	30.00	35.00
Gain, nominal, dB	12.0	12.0
Noise Figure, typical, dB	1.3	1.4
Group Delay Variation, maximum, ns	90	100
Group Delay Variation Bandwidth, MHz	5.00	5.00
Total Group Delay, maximum, ns	200	225
Total Group Delay, typical, ns	150	200
Return Loss, minimum, dB	18	18
Return Loss, typical, dB	20	20
Insertion Loss - Bypass Mode, typical, dB	1.5	2.3
Return Loss - Bypass Mode, typical, dB	18	18

Electrical Specifications, Tx Downlink

Frequency Range, MHz	758–788	925–960
Bandwidth, MHz	30.00	35.00
Insertion Loss, maximum, dB	0.60	0.75
Insertion Loss, typical, dB	0.40	0.60
Group Delay Variation, maximum, ns	35	35
Group Delay Variation Bandwidth, MHz	5.00	5.00
Total Group Delay, maximum, ns	80	85
Total Group Delay, typical, ns	70	60
Return Loss, minimum, dB	18	18
Return Loss, typical, dB	20	20
Input Power, RMS, maximum, W	200	200
Input Power, PEP, maximum, W	2,500	2,500
3rd Order PIM, typical, dBc	-162	-162
3rd Order PIM Test Method	Two +43 dBm carriers	Two +43 dBm carriers

Block Diagram

Click on image to enlarge.

Environmental Specifications

Operating Temperature	-40 °C to +65 °C (-40 °F to +149 °F)
Corrosion Test Method	IEC 60068-2-11, 30 days
Ingress Protection Test Method	IEC 60529:2001, IP67

Packaging and Weights

Included	Mounting hardware
Volume	8.3 L
Weight, net	9 kg \| 19.842 lb
Weight, without mounting hardware	8.5 kg \| 18.739 lb

Product Classification

Product Type

1-BTS:1-ANT (Uniplex) | Tower mounted amplifier

General Specifications

Color	Gray
Modularity	2-Twin
Mounting Pipe Hardware	Band clamps (2)
RF Connector Interface	4.3-10 Female

Dimensions

Height	266 mm \| 10.472 in
Width	276 mm \| 10.866 in
Depth	113 mm \| 4.449 in
Mounting Pipe Diameter Range	42.6–122 mm

Electrical Specifications

License Band, Band Pass	APT 700
License Band, LNA	APT 700 \| CEL 900 \| EDD 800

Electrical Specifications, dc Power/Alarm

dc Switching/Redundancy	Yes
Lightning Surge Current	10 kA
Lightning Surge Current Waveform	8/20 waveform

Electrical Specifications, AISG

AISG Connector	8-pin DIN Female
AISG Connector Standard	IEC 60130-9
Protocol	AISG 2.0
Voltage, AISG Mode	10–30 Vdc

Electrical Specifications

Sub-module	1 \| 2	1 \| 2
Branch	1	2
Port Designation	ANT 700	ANT 900
License Band	APT 700, Band Pass; APT 700, LNA	CEL 900, LNA

Electrical Specifications, Rx Uplink

Frequency Range, MHz	703–733	880–915
Bandwidth, MHz	30.00	35.00
Gain, nominal, dB	12.0	12.0
Noise Figure, typical, dB	1.3	1.4
Group Delay Variation, maximum, ns	90	100
Group Delay Variation Bandwidth, MHz	5.00	5.00
Total Group Delay, maximum, ns	200	225
Total Group Delay, typical, ns	150	200
Return Loss, minimum, dB	18	18
Return Loss, typical, dB	20	20
Insertion Loss - Bypass Mode, typical, dB	1.5	2.3
Return Loss - Bypass Mode, typical, dB	18	18

Electrical Specifications, Tx Downlink

Frequency Range, MHz	758–788	925–960
Bandwidth, MHz	30.00	35.00
Insertion Loss, maximum, dB	0.60	0.75
Insertion Loss, typical, dB	0.40	0.60
Group Delay Variation, maximum, ns	35	35
Group Delay Variation Bandwidth, MHz	5.00	5.00
Total Group Delay, maximum, ns	80	85
Total Group Delay, typical, ns	70	60
Return Loss, minimum, dB	18	18
Return Loss, typical, dB	20	20
Input Power, RMS, maximum, W	200	200
Input Power, PEP, maximum, W	2,500	2,500
3rd Order PIM, typical, dBc	-162	-162
3rd Order PIM Test Method	Two +43 dBm carriers	Two +43 dBm carriers

Environmental Specifications

Operating Temperature	-40 °C to +65 °C (-40 °F to +149 °F)
Corrosion Test Method	IEC 60068-2-11, 30 days
Ingress Protection Test Method	IEC 60529:2001, IP67