Warning Icon
This product will be discontinued on: November 30, 2024

For other alternatives, please contact us for more information.

2 Replacement products available
  • RRZZVV-65B-R6N43
    12-port sector antenna, 4x 694-960,4x 1427–2690 and 4x 1695- 2690 MHz, 65° HPBW, 6x RET
  • RRZZVV-65B-R6NV3
    12-port sector antenna, 4x 694-960,4x 1427–2690 and 4x 1695- 2690 MHz, 65° HPBW, 6x RET

RRZZVV-65B-R6NV2

12-port sector antenna, 4x 694-960,4x 1427–2690 and 4x 1695- 2690 MHz, 65° HPBW, 6x RET

Find a Partner
Specifications
Finish making your selections or clear them to view relevant specifications.
Features and Benefits
  • All Internal RET actuators are connected in “Cascaded SRET” configuration
  • Retractable tilt indicator rods
  • Antenna shape optimized for wind load reduction
  • RF Connectors/Ports configuration designed for Sharing Configuration

General Specifications

Antenna Type Sector
Band Multiband
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material Fiberglass, UV resistant
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, mid band 8
RF Connector Quantity, low band 4
RF Connector Quantity, total 12

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 2 female | 2 male
Input Voltage 10–30 Vdc
Internal RET Low band (2) | Mid band (4)
Power Consumption, active state, maximum 8 W
Power Consumption, idle state, maximum 1 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 430 mm | 16.929 in
Depth 197 mm | 7.756 in
Length 2100 mm | 82.677 in
Net Weight, without mounting kit 35.4 kg | 78.044 lb

Array Layout

Click on image to enlarge.

Port Configuration

Click on image to enlarge.

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 694 – 960 MHz | 1427 – 2690 MHz | 1695 – 2690 MHz
Polarization ±45°
Total Input Power, maximum 900 W @ 50 °C

Electrical Specifications

Frequency Band, MHz 694–790 790–890 890–960 1427–1518 1695–2200 2300–2690 1695–2180 2490–2690
Gain, dBi 14.6 15.1 15.1 15.5 17.6 18.3 17.8 18.6
Beamwidth, Horizontal, degrees 66 60 55 72 64 60 69 63
Beamwidth, Vertical, degrees 10.5 9.4 8.7 6.9 5.5 4.5 5.5 4.4
Beam Tilt, degrees 2–12 2–12 2–12 2–12 2–12 2–12 2–12 2–12
USLS (First Lobe), dB 17 16 14 16 16 20 16 18
Front-to-Back Ratio at 180°, dB 29 30 33 30 31 33 30 32
Isolation, Cross Polarization, dB 27 27 27 26 26 26 27 27
Isolation, Inter-band, dB 27 27 27 26 26 26 26 26
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -153 -153 -153 -153 -153 -153 -153 -153
Input Power per Port at 50°C, maximum, watts 250 250 250 200 200 150 200 150

Electrical Specifications, BASTA

Frequency Band, MHz 694–790 790–890 890–960 1427–1518 1695–2200 2300–2690 1695–2180 2490–2690
Gain by all Beam Tilts, average, dBi 14.2 14.7 14.8 15.3 16.9 17.9 17.2 18.2
Gain by all Beam Tilts Tolerance, dB ±0.6 ±0.4 ±0.5 ±0.4 ±1 ±0.6 ±1.1 ±0.5
Beamwidth, Horizontal Tolerance, degrees ±10.4 ±6.5 ±5.7 ±11 ±8.6 ±7 ±10.1 ±7.6
Beamwidth, Vertical Tolerance, degrees ±0.9 ±0.7 ±0.8 ±0.3 ±0.7 ±0.3 ±0.6 ±0.2
USLS, beampeak to 20° above beampeak, dB 17 16 15 14 15 16 13 14
Front-to-Back Total Power at 180° ± 30°, dB 23 21 21 21 26 26 24 25
CPR at Boresight, dB 20 22 19 18 19 16 21 20
CPR at Sector, dB 11 7 5 8 6 2 9 7

Mechanical Specifications

Effective Projective Area (EPA), frontal 0.47 m² | 5.059 ft²
Effective Projective Area (EPA), lateral 0.24 m² | 2.583 ft²
Wind Loading @ Velocity, frontal 495.0 N @ 150 km/h (111.3 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 253.0 N @ 150 km/h (56.9 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 745.0 N @ 150 km/h (167.5 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 316.0 N @ 150 km/h (71.0 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 530 mm | 20.866 in
Depth, packed 349 mm | 13.740 in
Length, packed 2272 mm | 89.449 in
Weight, gross 48.2 kg | 106.263 lb

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system

General Specifications

Antenna Type Sector
Band Multiband
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material Fiberglass, UV resistant
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, mid band 8
RF Connector Quantity, low band 4
RF Connector Quantity, total 12

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 2 female | 2 male
Input Voltage 10–30 Vdc
Internal RET Low band (2) | Mid band (4)
Power Consumption, active state, maximum 8 W
Power Consumption, idle state, maximum 1 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 430 mm | 16.929 in
Depth 197 mm | 7.756 in
Length 2100 mm | 82.677 in
Net Weight, without mounting kit 35.4 kg | 78.044 lb

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 694 – 960 MHz | 1427 – 2690 MHz | 1695 – 2690 MHz
Polarization ±45°
Total Input Power, maximum 900 W @ 50 °C

Electrical Specifications

Frequency Band, MHz 694–790 790–890 890–960 1427–1518 1695–2200 2300–2690 1695–2180 2490–2690
Gain, dBi 14.6 15.1 15.1 15.5 17.6 18.3 17.8 18.6
Beamwidth, Horizontal, degrees 66 60 55 72 64 60 69 63
Beamwidth, Vertical, degrees 10.5 9.4 8.7 6.9 5.5 4.5 5.5 4.4
Beam Tilt, degrees 2–12 2–12 2–12 2–12 2–12 2–12 2–12 2–12
USLS (First Lobe), dB 17 16 14 16 16 20 16 18
Front-to-Back Ratio at 180°, dB 29 30 33 30 31 33 30 32
Isolation, Cross Polarization, dB 27 27 27 26 26 26 27 27
Isolation, Inter-band, dB 27 27 27 26 26 26 26 26
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -153 -153 -153 -153 -153 -153 -153 -153
Input Power per Port at 50°C, maximum, watts 250 250 250 200 200 150 200 150

Electrical Specifications, BASTA

Frequency Band, MHz 694–790 790–890 890–960 1427–1518 1695–2200 2300–2690 1695–2180 2490–2690
Gain by all Beam Tilts, average, dBi 14.2 14.7 14.8 15.3 16.9 17.9 17.2 18.2
Gain by all Beam Tilts Tolerance, dB ±0.6 ±0.4 ±0.5 ±0.4 ±1 ±0.6 ±1.1 ±0.5
Beamwidth, Horizontal Tolerance, degrees ±10.4 ±6.5 ±5.7 ±11 ±8.6 ±7 ±10.1 ±7.6
Beamwidth, Vertical Tolerance, degrees ±0.9 ±0.7 ±0.8 ±0.3 ±0.7 ±0.3 ±0.6 ±0.2
USLS, beampeak to 20° above beampeak, dB 17 16 15 14 15 16 13 14
Front-to-Back Total Power at 180° ± 30°, dB 23 21 21 21 26 26 24 25
CPR at Boresight, dB 20 22 19 18 19 16 21 20
CPR at Sector, dB 11 7 5 8 6 2 9 7

Mechanical Specifications

Effective Projective Area (EPA), frontal 0.47 m² | 5.059 ft²
Effective Projective Area (EPA), lateral 0.24 m² | 2.583 ft²
Wind Loading @ Velocity, frontal 495.0 N @ 150 km/h (111.3 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 253.0 N @ 150 km/h (56.9 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 745.0 N @ 150 km/h (167.5 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 316.0 N @ 150 km/h (71.0 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 530 mm | 20.866 in
Depth, packed 349 mm | 13.740 in
Length, packed 2272 mm | 89.449 in
Weight, gross 48.2 kg | 106.263 lb
Click on image to enlarge.
Click on image to enlarge.

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system

Assembly Drawing

Product Specification

Assembly Drawing

Product Specification