Warning Icon

For other alternatives, please contact us for more information.

0 Alternative products available

2VV-33C-R4-V4

8-port multibeam antenna, 8x 1695–2690 MHz, 4x 33° HPBW, 4xRET

Find a Partner
Specifications
Finish making your selections or clear them to view relevant specifications.
Features and Benefits
  • Enhances network capacity and spectrum utilization when used in six sector applications
  • Reduces antenna count to minimize Cap-Ex and Op-Ex costs – 3 antennas required for 6 sector configurations
  • Utilizes RET-PMOD-A20-4A24

General Specifications

Antenna Type Multibeam
Band Single band
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material Fiberglass, UV resistant
Radiator Material Low loss circuit board
Reflector Material Aluminum
RF Connector Interface 7-16 DIN Female
RF Connector Location Bottom
RF Connector Quantity, high band 8
RF Connector Quantity, total 8

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface 2x 8 pin connector as per IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female Pin3: RS485A(AISG_B), Pin5: RS485B(AISG_A), Pin6: DC 10~30V, Pin7: DC_ Return
RET Interface, quantity 1 female | 1 male
Input Voltage 10–30 Vdc
Internal RET High band (4)
Power Consumption, active state, maximum 10 W
Power Consumption, idle state, maximum 2 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 395 mm | 15.551 in
Depth 228 mm | 8.976 in
Length 2499 mm | 98.386 in
Net Weight, without mounting kit 30.4 kg | 67.020 lb

Array Layout

Click on image to enlarge.

Port Configuration

Click on image to enlarge.

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 1695 – 2690 MHz
Polarization ±45°
Total Input Power, maximum 1,200 W @ 50 °C

Electrical Specifications

Frequency Band, MHz 1695–1880 1850–1990 1920–2180 2300–2400 2490–2690
Gain, dBi 19.0 19.4 19.6 20.0 20.1
Beam Centers, Horizontal, degrees ±27 ±27 ±27 ±27 ±27
Beamwidth, Horizontal, degrees 40 39 37 36 31
Beamwidth, Vertical, degrees 7.9 7.4 7 6.2 5.7
Beam Tilt, degrees 2–12 2–12 2–12 2–12 2–12
Horizontal Sidelobe, dB 18 18 18 18 17
USLS (First Lobe), dB 16 16 16 17 20
Front-to-Back Ratio at 180°, dB 31 36 38 36 35
Isolation, Cross Polarization, dB 30 30 30 30 30
Isolation, Inter-band, dB 30 30 30 30 30
Isolation, Beam to Beam, dB 28 28 28 28 28
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -153 -153 -153 -153 -153
Input Power per Port at 50°C, maximum, watts 200 200 200 200 200

Electrical Specifications, BASTA

Frequency Band, MHz 1695–1880 1850–1990 1920–2180 2300–2400 2490–2690
Gain by all Beam Tilts, average, dBi 18.6 19.0 19.3 19.5 19.7
Gain by all Beam Tilts Tolerance, dB ±0.5 ±0.4 ±0.4 ±0.5 ±0.4
Gain by Beam Tilt, average, dBi 2 ° | 17.7
7 ° | 17.9
12 ° | 17.7
2 ° | 18.3
7 ° | 18.7
12 ° | 18.5
2 ° | 18.6
7 ° | 19.0
12 ° | 18.7
2 ° | 19.1
7 ° | 19.5
12 ° | 19.3
2 ° | 19.4
7 ° | 19.9
12 ° | 19.4
Beamwidth, Horizontal Tolerance, degrees ±2.6 ±1.8 ±2.3 ±1.5 ±1.8
Beamwidth, Vertical Tolerance, degrees ±0.4 ±0.3 ±0.5 ±0.3 ±0.2
USLS, beampeak to 20° above beampeak, dB 16 16 16 17 20
Front-to-Back Total Power at 180° ± 30°, dB 24 26 27 29 28
CPR at Boresight, dB 21 24 19 21 19
CPR at 10 dB Horizontal Beamwidth, dB 11 16 16 14 10

Mechanical Specifications

Wind Loading @ Velocity, frontal 525.0 N @ 150 km/h (118.0 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 386.0 N @ 150 km/h (86.8 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 898.0 N @ 150 km/h (201.9 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 540.0 N @ 150 km/h (121.4 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 505 mm | 19.882 in
Depth, packed 386 mm | 15.197 in
Length, packed 2631 mm | 103.583 in
Weight, gross 44.4 kg | 97.885 lb

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant/Exempted
CHINA-ROHS Above maximum concentration value
UK-ROHS Compliant/Exempted

General Specifications

Antenna Type Multibeam
Band Single band
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material Fiberglass, UV resistant
Radiator Material Low loss circuit board
Reflector Material Aluminum
RF Connector Interface 7-16 DIN Female
RF Connector Location Bottom
RF Connector Quantity, high band 8
RF Connector Quantity, total 8

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface 2x 8 pin connector as per IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female Pin3: RS485A(AISG_B), Pin5: RS485B(AISG_A), Pin6: DC 10~30V, Pin7: DC_ Return
RET Interface, quantity 1 female | 1 male
Input Voltage 10–30 Vdc
Internal RET High band (4)
Power Consumption, active state, maximum 10 W
Power Consumption, idle state, maximum 2 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 395 mm | 15.551 in
Depth 228 mm | 8.976 in
Length 2499 mm | 98.386 in
Net Weight, without mounting kit 30.4 kg | 67.020 lb

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 1695 – 2690 MHz
Polarization ±45°
Total Input Power, maximum 1,200 W @ 50 °C

Electrical Specifications

Frequency Band, MHz 1695–1880 1850–1990 1920–2180 2300–2400 2490–2690
Gain, dBi 19.0 19.4 19.6 20.0 20.1
Beam Centers, Horizontal, degrees ±27 ±27 ±27 ±27 ±27
Beamwidth, Horizontal, degrees 40 39 37 36 31
Beamwidth, Vertical, degrees 7.9 7.4 7 6.2 5.7
Beam Tilt, degrees 2–12 2–12 2–12 2–12 2–12
Horizontal Sidelobe, dB 18 18 18 18 17
USLS (First Lobe), dB 16 16 16 17 20
Front-to-Back Ratio at 180°, dB 31 36 38 36 35
Isolation, Cross Polarization, dB 30 30 30 30 30
Isolation, Inter-band, dB 30 30 30 30 30
Isolation, Beam to Beam, dB 28 28 28 28 28
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -153 -153 -153 -153 -153
Input Power per Port at 50°C, maximum, watts 200 200 200 200 200

Electrical Specifications, BASTA

Frequency Band, MHz 1695–1880 1850–1990 1920–2180 2300–2400 2490–2690
Gain by all Beam Tilts, average, dBi 18.6 19.0 19.3 19.5 19.7
Gain by all Beam Tilts Tolerance, dB ±0.5 ±0.4 ±0.4 ±0.5 ±0.4
Gain by Beam Tilt, average, dBi 2 ° | 17.7; 7 ° | 17.9;12 ° | 17.7 2 ° | 18.3; 7 ° | 18.7;12 ° | 18.5 2 ° | 18.6; 7 ° | 19.0;12 ° | 18.7 2 ° | 19.1; 7 ° | 19.5;12 ° | 19.3 2 ° | 19.4; 7 ° | 19.9;12 ° | 19.4
Beamwidth, Horizontal Tolerance, degrees ±2.6 ±1.8 ±2.3 ±1.5 ±1.8
Beamwidth, Vertical Tolerance, degrees ±0.4 ±0.3 ±0.5 ±0.3 ±0.2
USLS, beampeak to 20° above beampeak, dB 16 16 16 17 20
Front-to-Back Total Power at 180° ± 30°, dB 24 26 27 29 28
CPR at Boresight, dB 21 24 19 21 19
CPR at 10 dB Horizontal Beamwidth, dB 11 16 16 14 10

Mechanical Specifications

Wind Loading @ Velocity, frontal 525.0 N @ 150 km/h (118.0 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 386.0 N @ 150 km/h (86.8 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 898.0 N @ 150 km/h (201.9 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 540.0 N @ 150 km/h (121.4 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 505 mm | 19.882 in
Depth, packed 386 mm | 15.197 in
Length, packed 2631 mm | 103.583 in
Weight, gross 44.4 kg | 97.885 lb
Click on image to enlarge.
Click on image to enlarge.

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant/Exempted
CHINA-ROHS Above maximum concentration value
UK-ROHS Compliant/Exempted

Product Specification

Product Specification