Warning Icon
This product was discontinued on: March 31, 2023

For other alternatives, please contact us for more information.

1 Replacement products available
  • 2NN2HH-33B-R4
    16-port multibeam antenna, 8x 698–896 MHz, 2x 2-beam 33° HPBW and 8x 1695–2400 MHz, 2x 2-beam 33° HPBW, 4x RET

2UNPX203.6R2

8-port multibeam antenna, 4x 698–894 and 4x 1710-2170 MHz, 4x 37° HPBW, 4x RET

Specifications
Finish making your selections or clear them to view relevant specifications.
Features and Benefits
  • Single panel design supporting two separate beams perfectly optimized at horizontal pointing angles of +27 degrees and –27 degrees from boresight

General Specifications

Antenna Type Multibeam
Band Multiband
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material Polyester fiberglass pultrusion
Radiator Material Aluminum | Low loss circuit board
Reflector Material Aluminum
RF Connector Interface 7-16 DIN Female
RF Connector Location Bottom
RF Connector Quantity, high band 4
RF Connector Quantity, low band 4
RF Connector Quantity, total 8

Remote Electrical Tilt (RET) Information

RET Interface 8-pin DIN Male
RET Interface, quantity 2 male
Input Voltage 10–30 Vdc
Internal RET High band (2) | Low band (2)
Power Consumption, idle state, maximum 2 W
Power Consumption, normal conditions, maximum 13 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 565 mm | 22.244 in
Depth 127 mm | 5 in
Length 1746 mm | 68.74 in
Net Weight, without mounting kit 37 kg | 81.571 lb

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 698 – 894 MHz | 1710 – 2170 MHz
Polarization ±45°

Electrical Specifications

Frequency Band, MHz 698–790 790–894 1710–1920 1920–2170
Gain, dBi 13.8 14.5 16.2 17.5
Beam Centers, Horizontal, degrees ±28 ±28 ±30 ±30
Beamwidth, Horizontal, degrees 43 37 35 32
Beamwidth, Vertical, degrees 25.1 21.7 12.1 11
Beam Tilt, degrees 1–16 1–16 0–10 0–10
USLS (First Lobe), dB 15 15 15 15
Front-to-Back Ratio at 180°, dB 20 20 30 30
Isolation, Cross Polarization, dB 22 22 20 20
VSWR | Return loss, dB 1.43 | 15.0 1.43 | 15.0 1.43 | 15.0 1.43 | 15.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150 -150 -150
Input Power per Port, maximum, watts 500 500 300 300

Electrical Specifications, BASTA

Frequency Band, MHz 698–790 790–894 1710–1920 1920–2170
Gain by all Beam Tilts, average, dBi 13.7 14.3 15.7 16.0
Gain by all Beam Tilts Tolerance, dB ±0.6 ±0.9 ±0.6 ±0.5
Gain by Beam Tilt, average, dBi 1 ° | 13.7
8 ° | 13.8
16 ° | 13.5
1 ° | 14.6
8 ° | 14.4
16 ° | 13.7
0 ° | 15.7
5 ° | 15.7
10 ° | 15.6
0 ° | 16.0
5 ° | 16.0
10 ° | 15.8
Beamwidth, Horizontal Tolerance, degrees ±2 ±3.6 ±2.5 ±3.1
Beamwidth, Vertical Tolerance, degrees ±1.7 ±1.6 ±0.7 ±0.9
USLS, beampeak to 20° above beampeak, dB 18 16 15 15
Front-to-Back Total Power at 180° ± 30°, dB 21 17 31 31

Mechanical Specifications

Wind Loading @ Velocity, frontal 1,258.0 N @ 150 km/h (282.8 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 194.0 N @ 150 km/h (43.6 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 1,283.0 N @ 150 km/h (288.4 lbf @ 150 km/h)
Wind Speed, maximum 250 km/h (155 mph)

Packaging and Weights

Width, packed 625 mm | 24.606 in
Depth, packed 270 mm | 10.63 in
Length, packed 1940 mm | 76.378 in
Weight, gross 43 kg | 94.799 lb

Regulatory Compliance/Certifications

Agency Classification
CE Compliant with the relevant CE product directives
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant
CHINA-ROHS Below maximum concentration value
REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance
UK-ROHS Compliant

General Specifications

Antenna Type Multibeam
Band Multiband
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material Polyester fiberglass pultrusion
Radiator Material Aluminum | Low loss circuit board
Reflector Material Aluminum
RF Connector Interface 7-16 DIN Female
RF Connector Location Bottom
RF Connector Quantity, high band 4
RF Connector Quantity, low band 4
RF Connector Quantity, total 8

Remote Electrical Tilt (RET) Information

RET Interface 8-pin DIN Male
RET Interface, quantity 2 male
Input Voltage 10–30 Vdc
Internal RET High band (2) | Low band (2)
Power Consumption, idle state, maximum 2 W
Power Consumption, normal conditions, maximum 13 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 565 mm | 22.244 in
Depth 127 mm | 5 in
Length 1746 mm | 68.74 in
Net Weight, without mounting kit 37 kg | 81.571 lb

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 698 – 894 MHz | 1710 – 2170 MHz
Polarization ±45°

Electrical Specifications

Frequency Band, MHz 698–790 790–894 1710–1920 1920–2170
Gain, dBi 13.8 14.5 16.2 17.5
Beam Centers, Horizontal, degrees ±28 ±28 ±30 ±30
Beamwidth, Horizontal, degrees 43 37 35 32
Beamwidth, Vertical, degrees 25.1 21.7 12.1 11
Beam Tilt, degrees 1–16 1–16 0–10 0–10
USLS (First Lobe), dB 15 15 15 15
Front-to-Back Ratio at 180°, dB 20 20 30 30
Isolation, Cross Polarization, dB 22 22 20 20
VSWR | Return loss, dB 1.43 | 15.0 1.43 | 15.0 1.43 | 15.0 1.43 | 15.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150 -150 -150
Input Power per Port, maximum, watts 500 500 300 300

Electrical Specifications, BASTA

Frequency Band, MHz 698–790 790–894 1710–1920 1920–2170
Gain by all Beam Tilts, average, dBi 13.7 14.3 15.7 16.0
Gain by all Beam Tilts Tolerance, dB ±0.6 ±0.9 ±0.6 ±0.5
Gain by Beam Tilt, average, dBi 1 ° | 13.7; 8 ° | 13.8; 16 ° | 13.5 1 ° | 14.6; 8 ° | 14.4; 16 ° | 13.7 0 ° | 15.7; 5 ° | 15.7; 10 ° | 15.6 0 ° | 16.0; 5 ° | 16.0; 10 ° | 15.8
Beamwidth, Horizontal Tolerance, degrees ±2 ±3.6 ±2.5 ±3.1
Beamwidth, Vertical Tolerance, degrees ±1.7 ±1.6 ±0.7 ±0.9
USLS, beampeak to 20° above beampeak, dB 18 16 15 15
Front-to-Back Total Power at 180° ± 30°, dB 21 17 31 31

Mechanical Specifications

Wind Loading @ Velocity, frontal 1,258.0 N @ 150 km/h (282.8 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 194.0 N @ 150 km/h (43.6 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 1,283.0 N @ 150 km/h (288.4 lbf @ 150 km/h)
Wind Speed, maximum 250 km/h (155 mph)

Packaging and Weights

Width, packed 625 mm | 24.606 in
Depth, packed 270 mm | 10.63 in
Length, packed 1940 mm | 76.378 in
Weight, gross 43 kg | 94.799 lb

Regulatory Compliance/Certifications

Agency Classification
CE Compliant with the relevant CE product directives
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant
CHINA-ROHS Below maximum concentration value
REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance
UK-ROHS Compliant